Horizontal clamps are made with medium carbon steel of high strength. Extra hard material is used wherever required. Individual clamp is proof tested with 2 times the load of working load limit. Non marring plate clamps can be used to lift all structural steel plates including stainless steel, iron, and aluminum without marking or damaging the surface.
- Available in capacities of 4,5 & 6 metric tons pair wise.
- Available jaw opening from (0 – 120 )mm for different sizes
- Individual clamp is proof tested with 2 times the load of working load limit.
- Plates ca be lifted without marking or damaging surface.
Dont’s
- DO NOT use on smooth polished surfaces.
- DO NOT use the clamp on plates with surface contamination (dirt, grease, scale, etc…).
- DO NOT use single clamp.
| PART NO. | Capacity (ton) | Jaw Opening (mm) | A | B | C | D | E | F | G |
| HPLNMC-2 | 1 | 0-25 | 310 | 310 | 105 | 80 | 150 | 28 | 20 |
| HPLNMC-4 | 2 | 0-45 | 443 | 330 | 130 | 85 | 182 | 30 | 25 |
| HPLNMC-6 | 3 | 0-45 | 443 | 330 | 130 | 85 | 182 | 30 | 25 |
| HPLNMC-8 | 4 | 0-50 | 490 | 350 | 130 | 87 | 215 | 30 | 25 |
| HPLNMC-10 | 5 | 0-50 | 490 | 350 | 130 | 87 | 215 | 30 | 25 |
| HPLNMC-12 | 6 | 0-80 | 510 | 370 | 150 | 90 | 225 | 32 | 25 |
| HPLNMC-16 | 8 | 10-100 | 520 | 370 | 150 | 90 | 225 | 32 | 25 |
| HPLNMC-20 | 10 | 10-100 | 520 | 370 | 150 | 90 | 225 | 32 | 25 |