Horizontal Plate Lifting Clamp without spring

Horizontal clamps are designed to lift and  transport steel plates  in the horizontal position  up to a hardness of  30HRC  providing  the plate can withstand  the forces imposed. Caution should be used  so that  maximum  single angle is not exceeded  and  horizontal lifting clamps must always be used in pairs.

Horizontal Plate Lifting Clamp without spring
Horizontal Plate Lifting Clamp without spring
Horizontal Plate Lifting Clamp without spring
  • Available in capacities up to16 tons(in pair).
  • Handles plates up to 120mm thick.
  • Should not exceed 30 HRC.
  • Replacement parts available for clamps.

Dont’s

  • DO NOT use single clamp.
  • DO NOT exceed 60º angle when lifting.
  • DO NOT lift plates with a temperature of  120ºC.
Model WLL (Ton) Jaw opening (mm) ABCD ØD Ø d Weight (Kg)
HPLC-2 10-20901556542202016
HPLC-420-30921686552202020
HPLC-6310-481041857554252320
HPLC-10550-10020031510099303025
HPLC-16860-180208335100109333325

Horizontal Plate Lifting Clamp spring loaded

Horizontal clamps are made with medium carbon  steel of  high strength. Extra hard material is used wherever required. Individual clamp is proof  tested with 2 times the load  of working load  limit. A spring is incorporated into the clamp to give an initial bite on the material. Company name with logo (FERRETERRO), working load limit (WLL) and  jaw opening all are mentioned  in the clamps. Maintenance replacements parts are available.

Horizontal Plate Lifting Clamp spring loaded
Horizontal Plate Lifting Clamp spring loaded
Horizontal Plate Lifting Clamp spring loaded
  • Available in capacities up to16 tons (in pair).
  • Handles plates up to 120mm thick.
  • Should not exceed 30 HRC.
  • A spring is incorporated into the clamp for initial bite.

Dont’s

  • DO NOT use single clamp.
  • DO NOT exceed 60º angle when lifting.
  • DO NOT lift plates with a temperature of 120ºC.
Model WLL (Ton) Jaw opening (mm) ABCD ØD Ø d Weight (Kg)
HPLC-2 10-20901556542202016
HPLC-420-30921686552202020
HPLC-6310-481041857554252320
HPLC-10550-10020031510099303025
HPLC-16860-180208335100109333325

Non marring plate lifting clamp

Horizontal clamps are made with medium carbon  steel of  high strength. Extra hard material is used wherever required. Individual clamp is proof  tested with 2 times the load  of working load  limit. Non marring plate clamps can be used  to lift all  structural steel plates including stainless  steel, iron, and aluminum without marking or damaging  the  surface.

Non marring plate lifting clamp
Non marring plate lifting clamp
  • Available in capacities of 4,5 & 6 metric tons pair wise.
  • Available jaw opening from (0 – 120 )mm for different sizes
  • Individual clamp is proof tested with 2 times the load of working load limit.
  • Plates ca be lifted without marking or damaging surface.

Dont’s

  • DO NOT use on smooth polished surfaces.
  • DO NOT use the clamp on plates with surface contamination (dirt, grease, scale, etc…).
  • DO NOT use single clamp.
PART NO. Capacity (ton) Jaw Opening (mm) A BCDEFG
HPLMNC-48 Ton0-70443330130851823025
HPLMNC-510 Ton0-70443330130851823025
HPLMNC-612 Ton50-100490350130872153025

Non marring with spring loaded plate lifting clamp

Horizontal clamps are made with medium carbon  steel of  high strength. Extra hard material is used wherever required. Individual clamp is proof  tested with 2 times the load  of working load  limit. Non marring plate clamps can be used  to lift all  structural steel plates including stainless  steel, iron, and aluminum without marking or damaging  the  surface.

Non marring with spring loaded plate lifting clamp
Non marring with spring loaded plate lifting clamp
  • Available in capacities of 4,5 & 6 metric tons pair wise.
  • Available jaw opening from (0 – 120 )mm for different sizes
  • Individual clamp is proof tested with 2 times the load of working load limit.
  • Plates can be lifted without marking or damaging surface.

Do’s  &  Dont’ s

  • DO clean the pads regularly, clean in water only.
  • DO NOT use the clamp on plates with surface contamination (dirt, grease, scale, etc.).
  • DO NOT use single clamp.
  • DO inspect the clamp before each use. If pads are cut or can not be cleaned, take clamp out of service and  replace pads.
PART NO. Capacity (ton) Jaw Opening (mm) A BCDEFG
HPLMNC-44 Ton0-70443330130851823025
HPLMNC-515 Ton0-70443330130851823025
HPLMNC-66 Ton50-100490350130872153025

Plate Lifting Clamp with adjustable jaw opening

  • For lifting, handling and transporting of packages and single steel plates.
  • Horizontal lifting clamps must always be used in pairs.
  • Capacity 1.5 tons per pair up to 9 tons per pair.
  • Opening 3 – 180, 3 – 300 and 3 – 420 mm.
Plate Lifting Clamp with adjustable jaw opening
Plate Lifting Clamp with adjustable jaw opening
Model WLL (ton) Jaw     Opening   (mm) A B D E F R X Y Weight
HPLC-4 2 3-180 290 200 30 135 27 60 87 20 9
HPLC-6 3 3-300 410 235 35 165 27 70 105 20 13
HPLC-10 5 3-420 540 250 40 165 27 75 120 20 23
HPLC-16 8 3-420 540 250 40 165 27 75 120 20 29.5

Specifications for CROCODILE CLAMPS

Horizontal Clamps Coated for stainless steel/ finished glossy and machined plates:
Type:

  1. With Fixed Jaw
  2. With Flexi Jaw
  3. Shackles included
  4. All clamps are remote releasing

Standard specifications: Alloy steel construction, Heat treated, suitable upto 35 HRC hardness, Spare parts available, Side lifting provision, Hinged, Cryogenic treated, with Competent person certificates , as per EN13155:2003

CROCODILE CLAMPS
CROCODILE CLAMPS
CROCODILE CLAMPS
Model WLL Jaw Capacity mm A mm B mm C  mm D  mm E mm F  mm G mm H mm J  mm K mm L mm M mm N mm P mm R mm S mm T mm
HPLCCR-3 1500  5-57 5 57 60 105 256 209 31 36 12 50 73 18 39 68 126 100 13
HPLCCR-5 2500  10-67 10 67 75 130 324 273 45 36 12 64 92 25 61 80 156 100 13
HPLCCR-7 3500  10-77 10 77 90 162 345 291 55 36 15 64 92 25 68 108 191 100 13
HPLCCR-10 5000  10-97 10 97 100 170 429 345 55 51 20 89 130 35 83 123 216 120 15

FAQs (Frequently Asked Questions)

What is horizontal Plate Lifting clamp?

Horizontal plate lifting clamp lifts plate horizontally and they are always used in pair. Horizontal plate lifting clamps grip to the steel plate either by the teeth biting into the surface of the plate or by gripping and supporting between multiple clamps to perform the lift.

What is Non-marring Plate lifting clamp?

Non-marring horizontal plate lifting clamp that lifts and transports non-deflecting plates and structures without marking, scratching, or damaging the material surface.

What type of material can be lifted by Non-marring lifting clamp?

Materials such as stainless steel, aluminum, natural stone, composite, painted materials, wood, glass, plastic, etc. Always remember, non marring clamps need care in use because you are relying on friction to grip the load.